|
Post by 77custom on Feb 11, 2009 13:12:41 GMT -7
I found one on TGP. It should be here sometime next week. I can't wait.
|
|
|
Post by benttop (Steve) on Feb 11, 2009 13:18:25 GMT -7
How you plan to use it? I mostly use mine for live volume control rather than bedroom playing.
|
|
|
Post by 77custom on Feb 12, 2009 7:07:08 GMT -7
I'll be using it for recording/live playing and bedroom. I want to test the waters with my Marshall 1959 (Metro kit) I built and my actual Marshall 1959 (I replaced the board with a metro PTP, mustards, Metro dagnall clone O/T). I have a few other amps I'd like to try it with. I was going to get a Brake Lite just to use with the Maz 18, but I figured for the price, I'll get the Air Brake and I'll be able to use it with the rest of my gear.
|
|
|
Post by sudsysul on Feb 14, 2009 5:13:56 GMT -7
I've got an old Marshall, albeit a 50 watter.. they work great with Marshalls for sure.
|
|
|
Post by 77custom on Feb 14, 2009 19:44:57 GMT -7
I've got an old Marshall, albeit a 50 watter.. they work great with Marshalls for sure. NOICE!!!!!!
|
|
|
Post by 77custom on Feb 17, 2009 10:47:15 GMT -7
Okay,
I got the Air Brake and I am very pleased with the tone it allows my Maz 18 to retain.
I only messed around with it for about a 1/2 hour so far but, I noticed the step adjustments have been changed. How do I go about resetting them to factory settings? (I know open the back, loosen the adjustable slider screws and adjust accordingly)
Is there an Ohm reading I can set each slider to?
One more. The bedroom level is reversed from what the Max/Min label says? Can I unsolder the purple wire and the cap leg and move them to the open Rheostat leg??
Thanks.
|
|
|
Post by benttop (Steve) on Feb 17, 2009 11:12:34 GMT -7
Okay, I got the Air Brake and I am very pleased with the tone it allows my Maz 18 to retain. I only messed around with it for about a 1/2 hour so far but, I noticed the step adjustments have been changed. How do I go about resetting them to factory settings? (I know open the back, loosen the adjustable slider screws and adjust accordingly) Is there an Ohm reading I can set each slider to? One more. The bedroom level is reversed from what the Max/Min label says? Can I unsolder the purple wire and the cap leg and move them to the open Rheostat leg?? Thanks. That's standard. The Max/Min refers to attenuation level. Max attenuation is minimum volume.
|
|
|
Post by 77custom on Feb 18, 2009 14:01:23 GMT -7
Okay, I got the Air Brake and I am very pleased with the tone it allows my Maz 18 to retain. I only messed around with it for about a 1/2 hour so far but, I noticed the step adjustments have been changed. How do I go about resetting them to factory settings? (I know open the back, loosen the adjustable slider screws and adjust accordingly) Is there an Ohm reading I can set each slider to? One more. The bedroom level is reversed from what the Max/Min label says? Can I unsolder the purple wire and the cap leg and move them to the open Rheostat leg?? Thanks. That's standard. The Max/Min refers to attenuation level. Max attenuation is minimum volume. Thanks, this was explained to me by the good Dr!
|
|
|
Post by love2play on Apr 2, 2009 22:59:07 GMT -7
I just received mine today - using on a Fender Deluxe Reverb RI, only had time to mess with it for about 30 minutes. Dang...this thing is cool. Can't wait until I have enough saved up for my new Dr Z amp...this means I will have to lay off buying another guitar for a while...
|
|