|
Post by benttop (Steve) on Jan 28, 2009 8:41:07 GMT -7
Are there any special considerations in biasing this amp, based on the unique half-power configuration? OK, two questions then - what is the bias setting on this?
|
|
|
Post by DRZ on Jan 28, 2009 13:30:24 GMT -7
First and foremost it is Self Biasing so no adjustment is needed. It is a split load self bias with a unique designed power splitter. Every thing has been taken care of "so pay no attention to the man behind the curtain" taken from Wizard of Oz., i.e. don't look inside.........
DR.Z
|
|
|
Post by benttop (Steve) on Jan 28, 2009 13:35:22 GMT -7
|
|
|
Post by Curt on Jan 28, 2009 14:48:41 GMT -7
First and foremost it is Self Biasing so no adjustment is needed. It is a split load self bias with a unique designed power splitter. Every thing has been taken care of "so pay no attention to the man behind the curtain" taken from Wizard of Oz., i.e. don't look inside......... DR.Z THIS is interesting. Plug and play any 6V6 Doc?
|
|
|
Post by DRZ on Jan 28, 2009 14:50:02 GMT -7
That is a very nice chart Steve, thanks for putting it together and sharing with us.
One little niggle though, Ghia V1 is a 12AX7 and V2 is a 5751.
Z
|
|
|
Post by benttop (Steve) on Jan 28, 2009 14:56:54 GMT -7
That is a very nice chart Steve, thanks for putting it together and sharing with us. One little niggle though, Ghia V1 is a 12AX7 and V2 is a 5751. Z Finally, the voice of authority. I had seen both ways around, so I'm happy to fix it up. Any other niggles let me know - I forgot to add the Loop N/A on the Remedy, so I KNOW there will be at least one more of these.
|
|
|
Post by mcook217 on Jan 28, 2009 15:46:36 GMT -7
hey, i found one, the fx loop is not opt on the Rx Jr. (at least that was what i was told when i ordered it, the overdose jack is in it's place, which would mean the RX ES can't have one either)
|
|
|
Post by bluzman on Jan 28, 2009 16:13:46 GMT -7
...Every thing has been taken care of "so pay no attention to the man behind the curtain" taken from Wizard of Oz., i.e. don't look inside......... DR.Z Geeze... Now I HAVE to look inside!!
|
|
|
Post by taswegian on Jan 28, 2009 16:41:44 GMT -7
If you do, you will hear a voice thru a small speaker, just by the transformer say, "This amp will self-destruct in 30 seconds. . .29. . .28..") ;D
|
|
|
Post by benttop (Steve) on Jan 28, 2009 16:50:31 GMT -7
hey, i found one, the fx loop is not opt on the Rx Jr. (at least that was what i was told when i ordered it, the overdose jack is in it's place, which would mean the RX ES can't have one either) Thanks!
|
|
|
Post by dock66 on Jan 29, 2009 11:46:00 GMT -7
First and foremost it is Self Biasing so no adjustment is needed. It is a split load self bias with a unique designed power splitter. Every thing has been taken care of "so pay no attention to the man behind the curtain" taken from Wizard of Oz., i.e. don't look inside......... DR.Z I LOVE it. ;D
|
|
|
Post by jammergreg on Jan 29, 2009 11:48:36 GMT -7
Now I'm singing ''Somewhere Over The Rainbow'' ; ;D Let's go home TOTO!
|
|
|
Post by Phil (aka Phil) on Jan 29, 2009 18:04:40 GMT -7
First and foremost it is Self Biasing so no adjustment is needed. It is a split load self bias with a unique designed power splitter. Every thing has been taken care of "so pay no attention to the man behind the curtain" taken from Wizard of Oz., i.e. don't look inside......... DR.Z I took my chassis out to see what was inside... funny thing is, the entire inside, turret board and all, was covered in some gooey epoxy like material... oh wait, that's drool......D'OH!
|
|
|
Post by benttop (Steve) on Jan 29, 2009 18:08:45 GMT -7
Dr. Z amps, powered by drool! lol...
|
|
|
Post by benttop (Steve) on Jan 29, 2009 18:10:26 GMT -7
|
|