Post by stillerball on Nov 18, 2008 18:20:06 GMT -7
I am experiencing noise/distortion when using my AirBrake at high attenuation levels with my Ceriatone Plexi clone. Now I have used the Airbrake with my THD Flexi 50 for over a year with no issues whatsoever, even at full volume with full attenuation at home. The Ceriatone, however is a much louder amp so I am wondering if this has anything to do with it. I am only experiencing the noise/distortion/feedback at the bedroom setting. Setting 4 seems to work just fine, but the volume is still way too much. I have read through the other posts and it seems that I am not the only one to experience this. The noise is very pronounced and it sounds garbled to a scary extent, like something is actually overloading. I have tried changing tubes. The impedance is properly matched. Changed cabs. Changed cables. I have even tried the impedance mismatch that some of you have recommended. I include this info so you can know where I am at in the trouble-shooting process. Also, I certainly do not expect the AirBrake to take a cranked plexi to conversation level. Thank you for taking the time to check this out. Really into this forum!
easyed: Call any vegetable - call it by name! And the chances are good, that the vegetable will respond to you. F-Zappa.
Oct 1, 2019 19:49:10 GMT -7
The Bad Poodle: rutabay-ayga... rutabay-ayga
Oct 2, 2019 12:33:25 GMT -7
"Z" Steve: I'm losing status at the high school - I used to think that is was MY school
Oct 8, 2019 15:01:34 GMT -7
The Bad Poodle: A bunch of pom-pom girls, Looked down their nose at me. They had painted tons of posters, I had painted three. I hear the secret whispers Everywhere I go, My school spirit is at an All time low...
Oct 8, 2019 17:11:32 GMT -7
"Z" Steve: Oh Look! My hair is getting good in the back!
Oct 10, 2019 20:48:05 GMT -7
GuitarZ: Argghh! ETA for power is Sunday midnight. Thank you for giving us all a place to vent. At least we have a generator and our house suffered zero damage from the storms.
Nov 1, 2019 13:25:37 GMT -7
Ed M.: Yup generator is humming along.....
Nov 1, 2019 13:45:12 GMT -7
GuitarZ: Yea! Our power's back on. They beat their estimate by two days! Yea!!!!!! Let's hope you're right behind Ed M.
Nov 1, 2019 18:15:14 GMT -7
roscoenyc: Almost every piece of gear I have except for my tuner has at least one knob. Those are for adjusting. PSA for the "too much bass" crowd.
Nov 14, 2019 9:10:34 GMT -7
The Bad Poodle: cause we all know Too much bass increases "tube rattle"....
Nov 14, 2019 11:23:20 GMT -7
roscoenyc: Oh my goodness!!!
Nov 14, 2019 11:24:11 GMT -7